Juveniles Who Commit Sex Offenses Against Minors.

Presents population-based epidemiological information about the characteristics of juvenile offenders who commit sex offenses against minors. The authors analyzed data from the National Incident-Based Reporting System (NIBRS) and provided topical statistics highlighting the fact that juveniles account for more than one-third (35.6 percent) of this type of offender. Findings may support the development of research-based interventions and policies to reduce sexual assault and child molestation as perpetrated by juvenile offenders

A guide to the use of the pressure disk rotor model as implemented in INS3D-UP

This is a guide for the use of the pressure disk rotor model that has been placed in the incompressible Navier-Stokes code INS3D-UP. The pressure disk rotor model approximates a helicopter rotor or propeller in a time averaged manner and is intended to simulate the effect of a rotor in forward flight on the fuselage or the effect of a propeller on other aerodynamic components. The model uses a modified actuator disk that allows the pressure jump across the disk to vary with radius and azimuth. The cyclic and collective blade pitch angles needed to achieve a specified thrust coefficient and zero moment about the hub are predicted. The method has been validated with experimentally measured mean induced inflow velocities as well as surface pressures on a generic fuselage. Overset grids, sometimes referred to as Chimera grids, are used to simplify the grid generation process. The pressure disk model is applied to a cylindrical grid which is embedded in the grid or grids used for the rest of the configuration. This document will outline the development of the method, and present input and results for a sample case

Nonprofit Challenges: What Foundations Can Do

Our research shows that only 52 percent of nonprofit leaders believe that their foundation funders are aware of the challenges their organizations are facing. Only 36 percent think funders share the knowledge they have about what other nonprofits are doing to address similar challenges. And less than 33 percent believe foundation funders use their various resources to help nonprofits with their challenges. These findings are not about nonprofits asking for bigger grants -- they are about nonprofits wanting foundations to think more holistically about the resources at their disposal

Transparency, Performance Assessment, and Awareness of Nonprofits’ Challenges: Are Foundations and Nonprofits Seeing Eye to Eye?

· In order for nonprofits and foundations to work most effectively together, they must understand each other’s perspectives. · This article discusses the alignment between the perspectives of nonprofit and foundation chief executive officers on four aspects of foundation practice: transparency with the nonprofits they fund, support for nonprofit-performance assessment, awareness of nonprofits’ challenges, and the degree to which foundations use their resources to help address nonprofits’ challenges. · Nonprofit and foundation CEOs are aligned when it comes to the degree to which foundations are seen to be aware of nonprofits’ challenges and use their resources to help address them. They are not as well aligned, however, when it comes to the importance of foundations being transparent with the nonprofits they fund and whether or not foundations are supporting those nonprofits in performance assessment efforts

Mixed-method study of a conceptual model of evidence-based intervention sustainment across multiple public-sector service settings.

BackgroundThis study examines sustainment of an EBI implemented in 11 United States service systems across two states, and delivered in 87 counties. The aims are to 1) determine the impact of state and county policies and contracting on EBI provision and sustainment; 2) investigate the role of public, private, and academic relationships and collaboration in long-term EBI sustainment; 3) assess organizational and provider factors that affect EBI reach/penetration, fidelity, and organizational sustainment climate; and 4) integrate findings through a collaborative process involving the investigative team, consultants, and system and community-based organization (CBO) stakeholders in order to further develop and refine a conceptual model of sustainment to guide future research and provide a resource for service systems to prepare for sustainment as the ultimate goal of the implementation process.MethodsA mixed-method prospective and retrospective design will be used. Semi-structured individual and group interviews will be used to collect information regarding influences on EBI sustainment including policies, attitudes, and practices; organizational factors and external policies affecting model implementation; involvement of or collaboration with other stakeholders; and outer- and inner-contextual supports that facilitate ongoing EBI sustainment. Document review (e.g., legislation, executive orders, regulations, monitoring data, annual reports, agendas and meeting minutes) will be used to examine the roles of state, county, and local policies in EBI sustainment. Quantitative measures will be collected via administrative data and web surveys to assess EBI reach/penetration, staff turnover, EBI model fidelity, organizational culture and climate, work attitudes, implementation leadership, sustainment climate, attitudes toward EBIs, program sustainment, and level of institutionalization. Hierarchical linear modeling will be used for quantitative analyses. Qualitative analyses will be tailored to each of the qualitative methods (e.g., document review, interviews). Qualitative and quantitative approaches will be integrated through an inclusive process that values stakeholder perspectives.DiscussionThe study of sustainment is critical to capitalizing on and benefiting from the time and fiscal investments in EBI implementation. Sustainment is also critical to realizing broad public health impact of EBI implementation. The present study takes a comprehensive mixed-method approach to understanding sustainment and refining a conceptual model of sustainment

Navier-Stokes and potential theory solutions for ahelicopter fuselage and comparison with experiment

A thin-layer Navier-Stokes code and a panel method code are used to predict the flow over a generic helicopter fuselage. The computational results are compared with pressure data at four experimental conditions. Both methods produce results that agree with the experimental pressure data. However, separation patterns and other viscous flow features from the Navier-Stokes code solution are shown that cannot be easily modeled with the panel method

CFL3D, FUN3d, and NSU3D Contributions to the Fifth Drag Prediction Workshop

Results presented at the Fifth Drag Prediction Workshop using CFL3D, FUN3D, and NSU3D are described. These are calculations on the workshop provided grids and drag adapted grids. The NSU3D results have been updated to reflect an improvement to skin friction calculation on skewed grids. FUN3D results generated after the workshop are included for custom participant generated grids and a grid from a previous workshop. Uniform grid refinement at the design condition shows a tight grouping in calculated drag, where the variation in the pressure component of drag is larger than the skin friction component. At this design condition, A fine-grid drag value was predicted with a smaller drag adjoint adapted grid via tetrahedral adaption to a metric and mixed-element subdivision. The buffet study produced larger variation than the design case, which is attributed to large differences in the predicted side-of-body separation extent. Various modeling and discretization approaches had a strong impact on predicted side-of-body separation. This large wing root separation bubble was not observed in wind tunnel tests indicating that more work is necessary in modeling wing root juncture flows to predict experiments

The Sex and Race Specific Relationship between Anthropometry and Body Fat Composition Determined from Computed Tomography: Evidence from the Multi-Ethnic Study of Atherosclerosis.

BackgroundFew studies have investigated the relationship of anthropometric measurements with computed tomography (CT) body fat composition, and even fewer determined if these relationships differ by sex and race.MethodsCT scans from 1,851 participants in the population based Multi-Ethnic Study of Atherosclerosis were assessed for visceral and subcutaneous fat areas by semi-automated segmentation of body compartments. Regression models were used to investigate relationships for anthropometry with visceral and subcutaneous fat separately by sex and race/ethnicity.ResultsParticipants were 50% female, 41% Caucasian, 13% Asian, 21% African American, and 25% Hispanic. For visceral fat, the positive relationship with weight (p = 0.028), waist circumference (p<0.001), waist to hip ratio (p<0.001), and waist to height ratio (p = 0.05) differed by sex, with a steeper slope for men. That is, across the range of these anthropometric measures the rise in visceral fat is faster for men than for women. Additionally, there were differences by race/ethnicity in the relationship with height (p<0.001), weight (p<0.001), waist circumference (p<0.001), hip circumference (p = 0.006), and waist to hip ratio (p = 0.001) with the Hispanic group having shallower slopes. For subcutaneous fat, interaction by sex was found for all anthropometric indices at p<0.05, but not for race/ethnicity.ConclusionThe relationship between anthropometry and underlying adiposity differs by sex and race/ethnicity. When anthropometry is used as a proxy for visceral fat in research, sex-specific models should be used

Isometric and isokinetic back and arm lifting strengths: Device and measurement

This study was conducted to measure isometric (static) and isokinetic (dynamic) back and arm lifting strengths at 20, 60 and 100 cm s-1 of young adults. Ten male and ten female volunteers without a history of back pain participated. The isokinetic lifting task was achieved by designing and fabricating a servo controlled motorized dynamic strength tester (DST). A regression analysis and analysis of variance was carried out on the strength data. The peak static strength values were significantly greater from the peak dynamic strength values. The peak dynamic strength was inversely related to the speed of motion. There were significant differences between the dynamic strengths at different stages of lift.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/27450/1/0000490.pd

High-pass filtering to remove electrocardiographic interference from torso EMG recordings

SummaryRemoval of electrocardiographic (ECG) contamination of electromyographic (EMG) signals from torso muscles is often attempted by high-pass filtering. This study investigated the effects of the cut-off frequency used in this high-pass filtering technique on the resulting EMG signal. Surface EMGs were recorded on five subjects from the rectus abdominis, external oblique, and erector spinae muscles. These signals were then digitally high-pass filtered at cut-off frequencies of 10, 30, and 60 Hz. Integration and power analyses of the filtered EMGs were subsequently performed. It was found that an increase in the cut-off frequency affects the integrated EMG signal by (1) reducing the ECG contamination, (2) decreasing the amplitude, and (3) smoothing the signal. It was concluded that the use of a high-pass filter is effective in reducing ECG interference in integrated EMG recordings, and a cut-off frequency of approximately 30 Hz was optimal.RelevanceElectromyographic recordings of torso muscles are often used in the development of low-back biomechanical models. Unfortunately, these recordings are usually contaminated by electrocardiographic interference. High-pass filtering methods are sometimes used to diminish the influence of ECG from surface EMGs; however, the effects of these filters on the recorded and processed EMG have not been reported. The findings show that high-pass filtering is effective in reducing ECG contamination and motion artefact from integrated EMGs when the appropriate cut-off frequency is used. Inappropriate cut-off frequencies lead to either incomplete ECG removal or excess filtering of the EMG signal.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/31029/1/0000706.pd